ASTM B348 CP-ti UNS R50400 Rod & Grade 2 Titanium Rod Supplier in India
For metals to be used in any application, it is important that they display certain characteristics that determine their usefulness in said applications. For instance, titanium is a ductile metal, and so is it malleable. Hence, the right forming operations in combination with the ductility makes it relatively easy to form both Titanium Grade 2 Sheet & Plate.
Grade 2 Titanium Round Bar
ASTM B348 CP-ti UNS R50400 Rod
Titanium, as a metal is a lightweight material. And so, it is not uncommon for buyers belonging to the aerospace industry to use the Titanium Werkstoff No 3.7035 Shim Stock in building various pieces of equipment. Moreover, the metal has outstanding corrosion resistance properties, which further makes the use of a Titanium Uns R50400 Strip Tape a very lucrative deal in the aerospace industry. Since titanium has excellent mechanical strength, a designer is free to reduce the cross section or the wall of the Titanium Grade 2 Sheets to some degree. Hence, it is possible to make a very lightweight product using this material. Though the metal is very expensive, especially when compared to stainless steel if the Titanium Grade 2 Plate is gauged to some extent, it is possible to save on the cost of the material as well. The cost could be saved because the metal is not easily corroded and the high mechanical strength makes it very difficult for the Titanium Gr 2 Coil to get physically or chemically damaged. Even though the mechanical strength of grade 1 is lower than Ti Alloy Gr 2 Foil, both metals have similar corrosion resistance properties.
Buy ASTM B348 Ti Grade 2 Rod, Titanium Gr 2 Cold Drawn Round Bar in various sizes and grades
Table of Content
Specifications Of Grade 2 Titanium Round Bar
Check sizes and dimensions of ASTM B348 Gr 2 Titanium Flat Bar & Grade 2 Ti Round Bar
| Grade | grade 2 titanium/ UNS R50400/ Gr 2 Titanium |
|---|---|
| Specification | AMS 4902 and ASTM B348 UNS R50400 |
| Standard | API, SUS, DIN, ASTM, AISI, EN, UNS, ASME, GB |
| Round bar sizes in MM | 3 Mm To 800 MM |
| Hex Bar sizes in MM | 2 Mm To 100 MM |
| Square bar sizes in MM | 4 to 100mm |
| Finish | Bright, Rough Turned, Slit Rolled Edge, Hot Rolled Annealed, Peeled, Centreless Ground, Grinding, Centreless Ground And Black Cold Drawn, Hot Rolled, Smooth Turned, Polish |
| Surface | Cold Drawn, Polished, Hot Rolled Pickled, Hairline, Bright, Sand Blasting Finished |
| Condition | Tempered and Hardened, annealed |
| Technique | Cold Rolled, Forged, Hot Rolled, Cold Drawn, Rod |
| Tolerance | H13K9, K11, H9, K10, H10, K12, H12, H8, H11, or as per clients requirements |
| Distributor and Suppliers Located in Following locations | Tehran, Bangalore, Bogota, Calgary, Indore, Coimbatore, Abu Dhabi, Khobar, Kuwait, Kanpur, Montreal, Baroda, India, Ludhiana, Noida, Karachi, Ahvaz, Mexico, Jamshedpur, Nagpur, Santiago, Courbevoie, Gujarat, Thiruvananthapuram, Rajkot, Bengaluru, Gurgaon, Kolkata, Ankara, Mumbai, Melbourne, Pimpri Chinchwad, Ahmedabad, Hyderabad, Ernakulam, Lagos, Caracas, Sydney, Ludhiana, Vadodara, Perth, London, Riyadh, Dammam, Muscat, New Delhi, Surat, Janeiro, Gimhae si, Howrah, Istanbul, Manama, Ranchi, Port of Spain, Chennai |
List Of ASTM B348 Grade 2 Titanium Rod Types
Ti Alloy Grade 2 Rod
UNS R50400 Round Bar
Alloy Gr 2 Flat Bar
Ti Grade 2 Hex Bar
Alloy Gr 2 Alloy Rounds
WERKSTOFF NR. 3.7035 Square Bar
ASTM B348 grade 2 Ti Annealed Bar
grade 2 titanium Bar Material
grade 2 titanium Din 3.7035 Round Bar Cold Drawn
ASTM B348 Alloy Gr 2 Black Bar
3.7035 grade 2 titanium Polished Bar
Gr 2 Titanium Bright Bar
Astm B348 Grade 2 Pure Titanium Round Bar
Astm B348 Gr2 Titanium Round Bar
Astm B348 Grade 2 25mm Pure Titanium Round Bar
Grade 2 Titanium Hollow Bar
Titanium Grade 2 1kg Round Bar
Grade 2 Titanium Flat Bar
Titanium 8mm Grade 2 Round Rod
Astmb348 Ti Grade 2 Titanium Hollow Bar
Astm B348 Grade 2 Titanium Bar
Grade 2 Industrial Titanium Bar Astm B348
Titanium Grade 2 100 Mm Bar
Pure Grade 2 Affinity Titanium Bars
ASTM B348 Grade 2 Titanium Rod Sizes
Buy custom sizes ASTM B348 Titanium Gr 2 Rounds & Ti Alloy Grade 2 Flat Bar from our Inventory
| Metric | Bar | ASTM | Japanese | ||||
|---|---|---|---|---|---|---|---|
| Bar Size | Diameter in MM | Bar Size | Diameter in Inch | Bar Size | Diameter in MM | Bar Size | Diameter in MM |
| 10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
| 6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
| 5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
| 9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
| 44 | 44 | ||||||
| 12 | 12 | #10 | 1.250 | 32 | 32 | ||
| 7 | 7 | #5 | 0.600 | 25M | 500 | 16 | 16 |
| 16 | 16 | #12 | 1.500 | 38 | 38 | ||
| 20 | 20 | #14 | 1.750 | 44 | 44 | ||
| 8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
| 25 | 25 | #16 | 2.000 | 51 | 51 | ||
| 5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
| 28 | 28 | #18 | 2.250 | 57 | 57 | ||
| 14 | 14 | #11 | 1.375 | 35 | 35 | ||
| 18 | 18 | #13 | 1.600 | 41 | 41 | ||
| 11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
| 32 | 32 | ||||||
| 40 | 40 | ||||||
| 22 | 22 | #15 | 1.875 | 48 | 48 | ||
| 50 | 50 | ||||||
| 36 | 36 | ||||||
Titanium ASTM B348 Cold Drawn Bar Weight
| Size in MM | Kgs per foot | Kgs per Meter | Size | Kgs per foot | Kgs per Mete | Size | Kgs per foot | Kgs per Mete |
|---|---|---|---|---|---|---|---|---|
| 9 | 0.152 | 0.498 | 1-3/8 | 2.303 | 7.550 | 7 | 59.432 | 196.000 |
| 5/32 | 0.029 | 0.095 | 7/8 | 0.926 | 3.038 | 3-1/2 | 14.850 | 48.772 |
| 1/8 | 0.019 | 0.062 | 22 | 0.908 | 2.979 | 3-1/4 | 12.800 | 41.996 |
| 4 | 0.030 | 0.098 | 24 | 1.080 | 3.543 | 3-3/4 | 17.001 | 55.780 |
| 3/16 | 0.043 | 0.141 | 25 | 1.180 | 3.871 | 4 | 19.306 | 63.340 |
| 3 | 0.017 | 0.055 | 20 | 0.753 | 2.470 | 3 | 10.900 | 35.762 |
| 5 | 0.047 | 0.154 | 1 | 1.210 | 3.970 | 4-1/4 | 21.908 | 72.249 |
| 2-3/4 | 9.169 | 30.083 | ||||||
| 6 | 0.068 | 0.223 | 27 | 1.368 | 4.490 | 4-3/4 | 27.366 | 90.249 |
| 1/4 | 0.076 | 0.249 | 1-1/8 | 1.534 | 5.033 | 5 | 30.461 | 99.940 |
| 2-5/8 | 8.354 | 27.409 | ||||||
| 7 | 0.091 | 0.298 | 30 | 1.691 | 5.548 | 5-1/2 | 36.690 | 121.000 |
| 5/16 | 0.118 | 0.387 | 1-1/4 | 1.924 | 6.349 | 6 | 43.860 | 143.900 |
| 8 | 0.120 | 0.398 | 32 | 1.894 | 6.314 | 6-1/2 | 51.093 | 167.630 |
| 7/32 | 0.058 | 0.190 | 26 | 1.271 | 4.170 | 4-1/2 | 24.4487 | 80.340 |
| 3/8 | 0.170 | 0.557 | 35 | 2.390 | 7.553 | 7-1/2 | 68.226 | 225.000 |
| 10 | 0.189 | 0.620 | 36 | 2.438 | 7.999 | 8 | 77.586 | 254.55 |
| 11 | 0.228 | 0.748 | 38 | 2.792 | 8.903 | 10 | 121.048 | 397.140 |
| 7/16 | 0.232 | 0.761 | 1-1/2 | 2.715 | 8.951 | |||
| 12 | 0.271 | 0.889 | 40 | 3.009 | 9.872 | |||
| 1/2 | 0.303 | 0.994 | 1-5/8 | 3.200 | 10.449 | |||
| 13 | 0.318 | 1.043 | 1-3/4 | 3.712 | 12.179 | |||
| 14 | 0.368 | 1.207 | 45 | 3.807 | 12.555 | |||
| 9/16 | 0.383 | 1.256 | 1-7/8 | 4.260 | 13.977 | |||
| 15 | 0.424 | 1.391 | 48 | 4.330 | 14.205 | |||
| 5/8 | 0.473 | 1.551 | 50 | 4.698 | 15.414 | |||
| 16 | 0.481 | 1.578 | 2 | 4.848 | 15.906 | |||
| 17 | 0.543 | 1.791 | 2-1/8 | 5.475 | 17.963 | |||
| 11/16 | 0.573 | 1.880 | 2-1/4 | 6.135 | 20.128 | |||
| 18 | 0.610 | 2.001 | 60 | 6.768 | 22.205 | |||
| 3/4 | 0.682 | 2.237 | 2-3/8 | 6.838 | 22.435 | |||
| 2-1/2 | 7.576 | 24.856 |
Gr 2 Titanium Astm B348 Hollow Bar Tolerance
A wide stock of ASTM B348 Ti Alloy Gr. 2 Bar, UNS R50400 Titanium Rod in our Mumbai warehouse
| Shape and Section | Size, width or diameter on bars | variations |
| MM | MM | |
| Square and Hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 50 ≦ 80 > 30 ≦ 50 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.110 + 0 to - 0.250 |
| rounds | ≥6 ≦ 18 > 50 ≦ 80 > 30 ≦ 50 > 18 ≦ 30 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.120 + 0 to - 0.100 + 0 to - 0.085 + 0 to - 0.140 |
| Flat width | < 18 > 18 ≦ 30 > 80 ≦ 100 > 50 ≦ 80 > 100 ≦ 130 > 30 ≦ 50 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.350 + 0 to - 1.00 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.130 + 0 to - 0.220 + 1.00 to - 1.00 |
| Flat thickness | < 18 > 30 ≦ 50 > 18 ≦ 30 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.250 + 0 to - 0.130 + 0 to - 0.350 |
| titanium Gr 2 bar Diameter and sizes | variation |
|---|---|
| ≧ 6 ≦ 18 > 120 ≦ 180 > 30 ≦ 50 > 315 ≦ 400 > 50 ≦ 80 > 250 ≦ 315 > 18 ≦ 30 > 180 ≦ 250 > 80 ≦ 120 > 400 |
+ 0 to - 0.070 + 0 to - 0.160 + 0 to - 0.100 + 0 to - 0.230 + 0 to - 0.120 + 0 to - 0.210 + 0 to - 0.085 + 0 to - 0.140 + 0 to - 0.185 + 0 to - 0.250 |
Titanium Grade 2 ASTM B348 Threaded Bar Chemical Analysis
Wide range of styles and sizes in Titanium 2 round bar, Gr 2 Ti ASTM B348 Hollow Bar and Titanium Gr 2 Rectangular Bar
| Elements | Carbon | Nitrogen | nitrogen | Hydrogen | Titanium | Iron |
|---|---|---|---|---|---|---|
| Gr 2 Round bar | 0.10 maximum | 0.03 maximum | 0.25 maximum | 0.015 maximum | bal | 0.30 maximum |
Titanium ASTM B348 Gr2 Square Bar Mechanical Properties Chart
| Minimum Yield (KSI) | Minimum Tensile (KSI) | Tensile Modulus | Hardness | Poisson Ratio |
|---|---|---|---|---|
| 40 | 50 | 103 GPa | 14.9 | 0.34-0.10 |
Equivalent Grades Of Grade 2 Titanium Flat Bar
| STANDARD | UNS | WERKSTOFF NR. |
|---|---|---|
| Gr 2 Round Bar | R50400 | 3.7035 |
Surface Finish of Grade 2 Titanium Round Bar
| ST | Smooth turned | SRE | Slit rolled edge |
| BD | Bright drawn | PR | Peeled & reeled |
| CF | Cold finished | HF | Hot finished |
| CG | Centreless ground | HRAP | Hot rolled annealed & pickled |
| P and T | Peeled and turned | P | Polished |
| CD | Cold drawn | RT | Rough turned & peeled |
Near by areas where we have supplied Gr 2 Ti ASTM B348 Hollow Bar
| We supplied to following Locations | Products |
| Turkey, Norway, United Arab Emirates (UAE), Malaysia | Grade 2 Industrial Titanium Bar Astm B348 |
| Indonesia, Philippines, Dammam -KSA, Belgium | Astm B348 Grade 2 Pure Titanium Round Bar |
| France, Europe, Qatar, Thailand | Astm B348 Gr2 Titanium Round Bar |
| Germany, Thailand, Czechia, Malaysia | Astm B348 Grade 2 25mm Pure Titanium Round Bar |
| USA, Bangladesh, Malaysia, Finland | Grade 2 Titanium Hollow Bar |
| Saudi Arabia (KSA), Kuwait, South Africa, Brazil | Titanium Grade 2 1kg Round Bar |
| South Africa, Singapore, Bahrain, Singapore | Grade 2 Titanium Flat Bar |
| Australia, UK, Philippines, Nigeria | Titanium 8mm Grade 2 Round Rod |
| Malaysia, Hong Kong, Oman, UAE | Astmb348 Ti Grade 2 Titanium Hollow Bar |
| Italy, Iran, Chile, Singapore | Astm B348 Grade 2 Itanium Bar |
| Malaysia, Russia, Netherlands, Dubai | Astm B348 Grade 2 Pure Titanium Round Bar |
| Europe, Malaysia, United Kingdom -UK, UAE | Astm B348 Grade 2 Ti-6al-4v Industrial Forged Bar |
| Canada, Poland, UK, Ellington -United States | Grade 2 Titanium Copper Bar Titanium Clad Copper Bar |
| Malaysia, Canada, Philippines, Singapore | Astm B348 Grade 2 Titanium Round Bar |
| Japan, Romania, Europe, Malaysia | Astm B348 F67 Grade 2 Forged Industrial Titanium Medical Bars |
| Colombia, Malaysia, Sweden, China | Titanium Grade 2 100 Mm Bar |
| Spain, Mexico, Egypt, UK | Pure Grade 2 Affinity Titanium Bars |
Stockist Of Titanium Grade 2 ASTM B348 Threaded Bar
| ASTM B348 grade 2 titanium Round Bars | Titanium Grade 2 Flat Bars stock |
| DIN 3.7035 Hex Bars | Alloy Gr 2 Threaded Bars |
| Ti Grade 2 Square Bars Polished | Ti UNS R50400 Bright Bars Hot Rolled |
| 3.7035 grade 2 Ti Hex Bars Bright | Alloy Gr 2 Alloy Hollow Bars |
| Gr 2 Ti Rectangular Bars Annealed | Alloy grade 2 Ti Polished Hex Bars |
| ASTM B348 Alloy Gr 2 Hex Bars Polished | grade 2 titanium Hexagonal Bars |
| ASTM B348 Alloy Gr 2 Rectangular Bars | Ti WERKSTOFF NR. 3.7035 Threaded Bars Black |
| Titanium UNS R50400 Round Bars | grade 2 Ti Din 3.7035 Flat Bars |
| Titanium Grade 2 Bars | Alloy grade 2 titanium Flat Bars Black |
| Alloy Gr 2 Rounds | ASME SB 338 gr 2 Flat Bars Bright |
| Ti Alloy Grade 2 Bright Bars | Alloy Gr 2 Flat Bars Polished |
| Alloy grade 2 Ti Hex Bars Annealed | WERKSTOFF NR. 3.7035 Cold Drawn Round Bars |
| ASME SB 338 gr 2 Forged Bars | Gr 2 Titanium Polished Bars |
| Alloy Gr 2 Alloy Rods | UNS R50400 Ti Flat Bars Cold Drawn |
| Alloy Gr 2 Square Bars Cold Drawn | Titanium Grade 2 Bright Bars material |
| Grade 2 Ti Rod | UNS R50400 Flat Bars Annealed |