SAF 2507 Duplex Stainless Steel Hex Bar Supplier in India
2507 Super Duplex Round Bar
Super Duplex 2507 Flat Bar
High quality Super Duplex 2507 Flat Bar & Rod exporter in Mumbai, India
Table of Content
2507 Super Duplex Round Bar Specification Chart
Check standards & specification of SDSS 2507 Round Bar, Super Duplex Steel 2507 Bright Bar
| Specification | ASTM A276/ A479 and ASME SA276/ SA479 |
|---|---|
| Standard | JIS, ASTM, API, AISI, ASME, EN, DIN, BS |
| Sizes in MM | 3 To 450 |
| Length in Meter | 3 to 6 or Custom Lengths |
| Flat Bar Sizes in MM | 3*20*20 to 12*100*100 |
| Square Bar Sizes in Mm | 4*4 To 100*100 |
| Finish | Matt Finish, Grinding, BA Finish, Bright Polished, Black, NO.4 Finish, Centreless Ground, Polish, Rough Turned |
| Form | Rings, Ingot, I/H Bar, Rod, Channel, Billet, Square, Profiles, T Bar, Half Round Bar, Half Round, Threaded, Round, Triangle, Hollow, Blocks, Angle, Forging, Rectangle, Round Rod, Flat 2507 round bar suppliers and Manufacturer |
| tolerance of bar | H 11, H 8, K 10, H 13, K 11, H 9, H 10, H 12, K 12, K9 or clients requirements |
| Condition | Sheared & Edged, Cold Drawnd, Polished Cold Drawn, Rolled Flat, Annealed 2507 round bar suppliers and Manufacturer |
| Technique | Forged, Cold Rolled, Cold Drawn, Hot Rolled |
| Distributor and Suppliers Located in Following locations | Pimpri Chinchwad, Nagpur, Montreal, Kolkata, Melbourne, Baroda, Calgary, Janeiro, Ludhiana, Ludhiana, Caracas, Gimhae si, Noida, Vadodara, Istanbul, Bengaluru, Bogota, Riyadh, Gujarat, Howrah, Khobar, Jamshedpur, Manama, Ahmedabad, Ernakulam, Port of Spain, Thiruvananthapuram, Courbevoie, Kanpur, Tehran, New Delhi, Dammam, Kuwait, Ranchi, Muscat, Ankara, Mexico, Gurgaon, Hyderabad, Mumbai, London, Abu Dhabi, India, Perth, Coimbatore, Lagos, Indore, Rajkot, Santiago, Karachi, Ahvaz, Sydney, Surat, Chennai, Bangalore |
Super Duplex 2507 Round Bars Length
Bar are delivered in random lengths of 3-7 m, depending on diameter.
SAF 2507 Round Bar Tolerance
| Diameter in MM | Tolerances in MM |
|---|---|
| 50 To 70 | -0/+0.19 |
| 20 To 35 | -0/+0.15 |
| 100 To 250 | -0/+1.50 |
| 40 To 45 | -0/+0.16 |
| 75 To 95 | -0/+1.00 |
Common Types Of Super Duplex 2507 Flat Bar
Buy directly from Super Duplex Steel 2507 Hex Bar manufacturers in India for exact sizes and low cost
2507 Duplex Stainless Steel Round Bars
Saf 2507 Duplex Forged Bar
2507 Super Duplex Square Bar
Super Duplex 2507 Flat Bars
Duplex 2507 Stainless Steel Hex Bars
2507 Duplex Stainless Steel cold rolled bar
2507 Duplex SS Hot rolled bars
2507 Duplex Stainless Cold Drawn Bar
Duplex Steel 2507 Hexagon Bar
Super Duplex Grade 2507 Bright Bars
Super Duplex Steel 2507 Rounds
Duplex 2507 Rod
Cold Drawn Polish Finish F51 Super Duplex 2507 Stainless Steel Round Bar
2507 super duplex stainless steel round bar
AISI 8mm - 200mm super 2507 stainless steel round bar
8mm super duplex 2507 round bar
20mm Super Duplex Round Bar
cold rolled ss 2507 super duplex stainless steel round bar
F53 Forged 2507 F55 Super Duplex Forged Round Bars
2507 Super Duplex steel ss bright round bar
Super Duplex 2507 Rods Size Chart
| Metric | Bar | ASTM | Japanese | ||||
|---|---|---|---|---|---|---|---|
| Bar Size | Diameter in MM | Bar Size | Diameter in inch | Bar Size | Diameter in MM | Bar Size | Diameter in MM |
| 12 | 12 | 10 | 1 To 250 | 32 | 32 | ||
| 6 | 6 | 4 | 0 To 500 | 20 | 300 | 13 | 13 |
| 9 | 9 | 7 | 0 To 875 | 35 | 1000 | 22 | 22 |
| 16 | 16 | 12 | 1 To 500 | 38 | 38 | ||
| 5 | 5 | 2 | 0 To 250 | 10 | 100 | 6 | 6 |
| 7 | 7 | 5 | 0 To 625 | 25 | 500 | 16 | 16 |
| 25 | 25 | 16 | 2 To 000 | 51 | 51 | ||
| 8 | 8 | 6 | 0 To 750 | 30 | 700 | 19 | 19 |
| 11 | 11 | 9 | 1 To 125 | 55 | 2500 | 29 | 29 |
| 5 To 5 | 5 To 5 | 3 | 0 To 375 | 15 | 200 | 10 | 10 |
| 10 | 10 | 8 | 1 To 000 | 45 | 1500 | 25 | 25 |
| 20 | 20 | 14 | 1 To 750 | 44 | 44 | ||
| 14 | 14 | 11 | 1 To 375 | 35 | 35 | ||
| 40 | 40 | ||||||
| 22 | 22 | 15 | 1 To 875 | 48 | 48 | ||
| 28 | 28 | 18 | 2 To 250 | 57 | 57 | ||
| 32 | 32 | ||||||
| 18 | 18 | 13 | 1 To 625 | 41 | 41 | ||
| 44 | 44 | ||||||
| 50 | 50 | ||||||
| 36 | 36 | ||||||
2507 Duplex Steel Flat Bar Features
- High resistance to general corrosion
- Have excellent resistance to stress corrosion cracking in chloride-bearing environments
- Excellent resistance to pitting and crevice corrosion
- Very high mechanical strength
- Physical properties that offer design advantages
- High resistance to erosion corrosion and corrosion fatigue good weldability
- Excellent mechanical properties that allow for lighter constructions, more compact design and less welding
Super Duplex Steel 2507 Bright Bar Chemical Structure
Huge stock of Super Duplex 2507 Rods, Flat & Hex Bar in our Mumbai warehouse, PED Approved 2507 round bar suppliers in india
| Carbon | Silicon | Manganese | Phosphorus | Sulfur | Chromium | Nickel | Molybdenum | nitrogen | Copper |
|---|---|---|---|---|---|---|---|---|---|
| ≤0.030 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.015 | 25 | 7 | 4 | 0.3 | ≤0.5 |
Mechanical Properties of Super Duplex Steel 2507 Hex Bar
| Proof strength | Tensile strength | Elongation | HB |
|---|---|---|---|
| MPa | MPa | % | approx |
| ≥550 | 760-930 | ≥25 | 260 |
2507 Hex Bar Physical Properties
Bar Density: 7.8 g/cm3, 0.28 lb/in3
Alloy 2507 Rod Equivalent Material
| Standard | unified numbering system | werkstoff No | European Standards | Director Identification Number | AFNOR | SS |
|---|---|---|---|---|---|---|
| 2507 Round Bar | S32750 | 1.4410 | - | X 2 CrNiMoN 25 7 4 | - | 2328 |
Super Duplex Grade 2507 Round Bar heat capacity
| Temperature in °C | J/(kg °C) | Temperature in °F | Btu/(lb °F) |
|---|---|---|---|
| 100 | 505 | 200 | 0.12 |
| 20 | 490 | 68 | 0.12 |
| 200 | 520 | 400 | 0.12 |
| 400 | 585 | 800 | 0.14 |
| 300 | 550 | 600 | 0.13 |
2507 Duplex Stainless Bar Thermal conductivity
Metric units, W/(m °C)
| Temperature, °C | 20 | 100 | 200 | 300 | 400 |
|---|---|---|---|---|---|
| SAF 2507 | 14 | 15 | 17 | 18 | 20 |
| Temperature, °F | 68 | 200 | 400 | 600 | 800 |
| SAF 2507 | 8 | 9 | 10 | 11 | 12 |
| Temperature, °C | 30-100 | 30-200 | 30-300 | 30-400 | |
| SAF 2507 | 13.5 | 14.0 | 14.0 | 14.5 | |
| Temperature, °F | 86-200 | 86-400 | 86-600 | 86-800 | |
| SAF 2507 | 7.5 | 7.5 | 8.0 | 8.0 |
Resistivity of Super Duplex SS 2507 Hex Bar
| Temperature, °C | μΩm | Temperature, °F | μΩin. |
|---|---|---|---|
| 300 | 1.03 | 600 | 40.7 |
| 100 | 0.89 | 200 | 34.9 |
| 20 | 0.83 | 68 | 32.7 |
| 200 | 0.96 | 400 | 37.9 |
| 400 | 1.08 | 800 | 43.2 |
Alloy 2507 Bright Bar Temperature Limit
| Bar Grade | Temperature |
| Super Duplex 2707 HD | 1080 To 1120°C/ 1976 To 2048°F |
| Super Duplex 2507 | 1050 To 1125°C/ 1922 To 2057°F |
Before choosing your 2507 round bar suppliers check our deliveries of last 2 years
| We supplied to following Locations | Products |
| Dammam -KSA, Indonesia, Philippines, Belgium | Cold Drawn Polish Finish F51 Super Duplex 2507 Stainless Steel Round Bars | Qatar, France, Europe, Thailand | 2507 super duplex stainless steel round bars | Czechia, Germany, Thailand, Malaysia | Super duplex 2507 stainless steel round bars | Malaysia, USA, Bangladesh, Finland | AISI 8mm - 200mm super 2507 stainless steel round bars | South Africa, Saudi Arabia, Kuwait, Brazil | 8mm super duplex 2507 round bars | Bahrain, South Africa, hoston, Singapore | 20mm Super Duplex Round Bars | Philippines, France, Australia, UK, Nigeria | cold rolled ss 2750 super duplex stainless steel round bars | Oman, Malaysia, Hong Kong, UAE | F53 Forged 2507 F55 Super Duplex Forged Round Bars | Chile, Italy, Iran, Singapore | 2507 Super Duplex steel ss bright round bars | United Arab Emirates, Turkey, Norway, Malaysia | AISI 2507 super duplex Bars | Netherlands, Malaysia, Russia, Dubai | cold drawn super duplex 2507 round bars | Egypt, Spain, Mexico, UK | ASTM A276 Super Duplex 2507 Stainless Round | United Kingdom -UK, Europe, Malaysia, UAE | Polished Surface 2507 Super Duplex Round Bars | UK, Canada, Poland, Ellington -United States | Super Duplex Stainless Steel 2507 Bars | Philippines, Malaysia, Canada, Singapore | Ss 2507 Cold Drawn Bar | Europe, Japan, Romania, Malaysia | 1.4410 Duplex Rod | Sweden, Colombia, Malaysia, China | Alloy 2507 Super Duplex Round bar | Malaysia, Taiwan, Los Alamos -Mexico, Philippines | Saf 2507 Super Duplex Hexagon Bar | Singapore, South Korea, NY 12203 (USA), Malaysia | Alloy 2507 Forged Bar |
Huge Stock Of 2507 Stainless Steel Threaded Bar
| 2507 Stainless Steel Rectangular Bars | 2507 Flat Bars |
| Stainless Steel Grade 2507 T-Bars | F55 Rounds |
| 2507 Stainless Steel Threaded Bars | 2507 UNS S32760 Rebar |
| F55 Hollow Bars | 2507 Stainless Steel Precision Ground Bars |
| Alloy 2507 Precision Ground Stock | 2507 Triangle bars |
| F55 Round Bars | 1.4501 f55 Round Rod |
| Alloy 2507 Bright Bars | Steel 2507 Black Bars |
| Grade 2507 Billets Bars | Alloy 2507 Ingot |
| 2507 UNS S32760 Square Bars | 2507 Stainless Steel Half-Round Bars |
| Saf 2507 Round Bars | stainless steel 2507 Hexagonal Bars |
| Steel 2507 Rods | stainless steel 2507 Hex Bars |
| 2507 UNS S32760 Hexagon Bars | Alloy 2507 Forged Bars |
2507 Duplex Steel Flat Bar Application
- Oil and gas industry
- Seawater cooling
- Salt evaporation industry
- Desalination plants
- Geothermal wells
- Refineries and petrochemical plants
- Pulp and paper industry
- Mechanical components requiring high strength