Alloy steels, though stronger than carbon steels, may be used for both high pressure and high temperature applications. Unlike carbon steels that use only 2 elements, Alloy Steel Gr. F11 Bars make use of elements at a substantially higher content. The sole purpose of using alloy steels for demanding applications is because the bridge the shortcomings of carbon steels at a reasonable cost.
Generally considered to be less strong than stainless steel alloys, the affordability of the ASTM A 182 Alloy Steel GR F11 Round Bars plays an important role in their purchase. Irrespective of their cost effective solutions, grade F11 bars are a way to fulfill the corrosion resistance as well as the mechanical property requirements set by various industries. Usually, these bars are hot worked and they undergo forging. Hence, the impact strength, as well as the high surface smoothness, are a result of the Alloy Steel DIN 1.7335 Round Bars being forged. Once the material is forged, they are allowed to be cooled to a temperature specified by specification ASTM A 182. The alloy must be cooled before the AISI AS F11 Hex Bar is given heat treatment. All the parameters of the heat treatment procedures are set by the specifications including the type of heat treatment to be performed on the Alloy Steel F11 A182 Bars, austenitizing/solution temperature as well. Other parameters for the treatment include the cooling media for the Astm A182 F11 Flat Bar and quenching temperature.
Astm A182 F11 Material Specification
Grade | F11 |
---|---|
Specification | Alloy Steel F11 Round Bar |
Square bar size | 4 To 100 MM |
Section | 3 to 12 MM thickness |
Round bar size | 3To 800 MM |
Angle bar size | 3MM * 20MM * 20MM ~ 12MM * 100MM * 100MM |
Hex Bar size | 2 To 100 MM |
Flat bar size | 2 To100 MM |
Width: 10 To 500 MM | |
Channel Bar | 80 x 40 MM To 150 x 75 MM Section; 5 To 6 MM thickness |
Rectangles Size | 33 x 30 MM To 295 x 1066 MM |
Hollow Bar | 32 MM OD x 16 MM ID to 250 MM OD x 200 MM ID |
Billet Size | 1/2 Inch to 495 MM Diameter |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Tolerance | K9, K10, K11, K12, H8, H9, H10, H11, H12, H13, or as per clients’ requirements |
Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Condition | Hardened & tempered, annealed |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Form | Round, Rod, T-Bars, Channel Bars, Precision Ground Bars, Flat Bars, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bars, Profiles, Billet, Ingot, I/H Bars, Forging etc. |
Alloy F11 Round Bars
Alloy Alloy F11 Threaded Round Bar
UNS K11597 Alloy Rounds
Alloy F11 T-Bars
Alloy Alloy F11 Polished Ground Stock
UNS K11597 Alloy Triangle Bars
Alloy F11 Flat Bars
Alloy Steel A182 F11 Round Bars
Alloy F11 Rebar
F11 Alloy Steel Bright Bars
ASTM A182 F11 Alloy Steel Hex Bars
F11 Alloy Steel Threaded Bars
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
---|---|---|---|
Cold Drawn and Ground | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
Cold Drawn and Polish | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 200.0 |
Astm A182 F11 Chemical Composition
Element | Alloy Steel F11 |
Cr | 8.0-10.0 |
C | 0.15 Max |
Mo | 0.90- 1.10 |
Mn | 0.30-0.60 |
Si | 0.50- 1.00 |
S | 0.030 Max |
P | 0.030 Max |
Ni | - |
Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
205 | 415 | 20 % |
Astm A182 F11 Equivalent
STANDARD | UNS | WERKSTOFF NR. |
ASTM A182 F11 | K11597 | 1.7335 |
Indonesia, Belgium, Dammam -KSA, Philippines | Astm A182 F11 Round Bar |
France, Thailand, Qatar, Europe | A182 F11 Square Bar |
Germany, Malaysia, Czechia, Thailand | Sa 182 F11 Hexagonal Bar |
USA, Finland, Malaysia, Bangladesh | Sa182 F11 Polished Bar |
Saudi Arabia (KSA), Brazil, South Africa, Kuwait | A182 Gr F11 Bright Bar |
South Africa, Singapore, Bahrain, Singapore | A182 F11 Cl2 Flat Bars |
Australia, Nigeria, Philippines, UK | Astm A182 Gr F11 Alloy Steel Threaded Bar |
Malaysia, UAE, Oman, Hong Kong | Sa 182 F11 Cl2 Hex Bar |
Italy, Singapore, Chile, Iran | Astm A182 F11 Class 2 Bar |
Turkey, Malaysia, United Arab Emirates (UAE), Norway | Sa 182 Gr F11 Rod |
Malaysia, Dubai, Netherlands, Russia | A182 Gr. F11 Square Bar |
Spain, UK, Egypt, Mexico | A182 F11 Bright bar |
Europe, UAE, United Kingdom -UK, Malaysia | Alloy Steel A182 F11 Threaded Bar |
Canada, Ellington -United States, UK, Poland | Grade F11 Cr-Mo A182 Polished Bar |
Malaysia, Singapore, Philippines, Canada | ASME SA182 Chrome Moly Gr.F11 Bright Bars |
Japan, Malaysia, Europe, Romania | ASTM A182 269mm f11 alloy steel mild steel round bar |
Colombia, China, Sweden, Malaysia | 16mm Alloy steel F11 Round bar |
Taiwan, Philippines, Malaysia, Los Alamos -Mexico | Alloy Steel F11 Hex Bar |
South Korea, Malaysia, Singapore, NY 12203 (USA) | Alloy Steel F11 Forged Bar |