We have Answers

  • +91 22 6636 3237
  • rahul@perfectimpex.net

ASTM A240 UNS S31803 Plate Suppliers in India


With a yield strength value of over 480 MPa, which is twice the yield strength of austenitic stainless steels 316L and 317L, duplex steels have an inherently mixed microstructure. The combination of its microstructure along with the chemistry of ASTM A240 UNS S31803 Sheet & Plate makes it virtually a resilient alloy with resistance properties across several media. Like the aforementioned stainless steel alloys, it is interesting to note that grade UNS S31803 also contains austenite stabilizing agent nitrogen in its alloy.

UNS S31803 Sheet

UNS S31803 Sheet
ASTM A240 UNS S31803 Plate

ASTM A240 UNS S31803 Plate

The resistance of SA 240 GR S31803 Cold Rolled Sheet to both pitting as well as crevice corrosion surpasses several austenitic alloys, and they are also resistant to seawater, making them suitable for marine engineering equipment. The UNS S31803 DSS Plate also has a higher resistance to corrosion and much better erosion fatigue properties. In addition to being abundantly resistant to corrosion, the SA 240 UNS S31803 Sheet has a lower thermal rate of expansion along with a higher thermal conductivity in comparison to austenitic steels as well. Properties that make the ASTM A240 UNS S31803 Plate significantly useful are its high mechanical strength and its excellent impact strength, which it derives from the addition of nitrogen in the alloy. From being used in Biofuels plants to being used in Effluent scrubbing systems and Food processing equipment, the unique properties of the Duplex SA 240 S31803 Plate permit it to serve across all industries.

Best price of Duplex Stainless Steel UNS S31803 Plate and Coils ex Mumbai, India



Specifications Of UNS S31803 Sheet

Material ASTM A240 UNS S31803 Sheet & ASTM A240 UNS S31803 Plate
ASTM A240 UNS S31803 Plate Specification ASTM A240 / ASME SA240
Tolerances of Width and thickness
  • EN 10258 (formerly DIN 59381)
  • EN 10088 ASTM A240 UNS S31803 strip (general)
  • EN 10151 ASTM A240 UNS S31803 strip for springs
Standard ASTM A240 UNS S31803 Plate Sizes 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
Duplex Stainless Steel UNS S31803 Plate Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
Duplex Steel S31803 Plate Length 2m, 2.44m, 3m, or as required
UNS S31803 Duplex Stainless Steel Plate Finish Cold rolled sheet (CR), Hot rolled plate (HR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASME SA 240 GR S31803 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Stainless Steel Grade S31803 Plate Hardness Half Hard, Quarter Hard, Soft, Hard, Spring Hard ASTM A240 UNS S31803 Sheet suppliers
Stock available in form of Plate, Sheet, Coils, Foils, Shim Sheet, Rolls, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
SA 240 GR S31803 Plate Manufacturers Jindal, Sail, Outokumpu, Shah Alloys, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO
Plasma profiles As per customer's drawings
Value added services for ASTM A240 UNS S31803 Plate Waterjet cutting, Plasma cutting, Laser cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.
Value added services for ASTM A240 UNS S31803 Coil
  • Cut-to-length
  • Slitting
  • Polishing
  • Blanking
Specialized in
  • ASTM A240 Type ASTM A240 UNS S31803 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • ASTM A240 Type ASTM A240 UNS S31803 Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • ASTM A240 Type ASTM A240 UNS S31803 Clad plate: ASTM A240 Type ASTM A240 UNS S31803 Clad plate is a composite steel plate made by bonding ASTM A240 Type ASTM A240 UNS S31803 plate, etc.
  • ASTM A240 Type ASTM A240 UNS S31803 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
Why choose Naman?
  • Free sample is available. (Yes, we could offer the sample for free charge but do not pay the cost of freight.)
    Mill Test Certificate is supplied with shipment.
    The third party inspection is accepted.
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Minimum Nitrogen content and Ferrite Count Test
Delivery time Generally it is 7-10 days if the ASTM A240 UNS S31803 Plate are in stock. or it is 15-20 days if the ASTM A240 UNS S31803 Plate are not in stock, it depends to quantity.

Duplex 1.4462 - UNS S31803 - F51 Sheet/ Plate hotrolled Finish 1
Sizes:
Thickness 3 mm - 100 mm
Width 1000 / 1250 / 1500 / 2000 / 2500 mm
Length 2000 / 2500 / 3000 / 6000 / 6000 tot max. 8000 mm
Duplex Steel 31803, SIZE: 2400 x 1200 X 10mm thickness

Duplex 1.4462 - UNS S31803 - F51 Sheets
Plates plasma cutting
Water-jet cutting
Laser-cutting
Sawn cuttings

A 240 UNS S31803 Duplex Stainless Plate (Hot Rolled Plates)

Width - 1250
Thickness - 5 mm to 80 mm

Hot Rolled Coils (material ASTM A240 UNS S31803)

Width - 1250
Thickness - 5-6 mm

ASTM A240 GR S31803 Cold Rolled Coil & Sheets

Width - 1250
Thickness - 0.5 mm to 3 mm


ASTM A240 GR UNS S31803 Plate Price List

PED approved A240 S31803 Material supplier in India, ASME SA 240 GR S31803 Sheet available in many sizes

ASTM A240 UNS S31803 Plate Price Price in INR Price in USD
Stainless Steel Hr Plates Grade Uns S31803 10pc (Size: 38.100mmx 858mm X 1228mm) INR 6420 USD 87.56
Duplex Steel Sheet Uns S31803 (0.8 X 1134 X 2014 Mm) Cold Rolled Polished 2k Coated With Pe 0.07 White/black INR 3850 USD 52.51
Stainless Steel Sheets (Cold Rolled) Grade Uns S31803 Size: 3 Mm X 1500 Mm X 3000 Mm ( Duplex Stainless Steel ) INR 29,771 USD 406.03
Duplex Stainless Steel Rektangel S31803 Sheet Size: thickness 12mm X Width 2000mm X Length 4500mm INR 9500 USD 129.56
Cold Rolled Stainless Steel Sheet In Coils, Spec: Astm304 2b, Trim Edge,-is 6911-304s1 Size: 0.6mm X 1260mm X Coil INR 26,682 USD 363.90

Frequently Used UNS S31803 DSS Plate Types

ASTM A240M UNS S31803 Plate

ASTM A240M UNS S31803 Plate

SA 240 UNS S31803 Sheet

SA 240 UNS S31803 Sheet

ASME SA 240 GR S31803 Plate

ASME SA 240 GR S31803 Plate

Duplex SA 240 S31803 cold rolled sheet

Duplex SA 240 S31803 cold rolled sheet

ASME SA 240 GR S31803 2B Sheet

ASME SA 240 GR S31803 2B Sheet

ASTM A240 GR S31803 Coil

ASTM A240 GR S31803 Coil

ASTM A240 GR S31803 Hot rolled plate

ASTM A240 GR S31803 Hot rolled plate

Duplex Steel S31803 Sheet

Duplex Steel S31803 Sheet

ASTM A240 GR S31803 Strips

ASTM A240 GR S31803 Strips

UNS S31803 DSS Strips

UNS S31803 DSS Strips

Duplex Steel 31803 Shim Stock

Duplex Steel 31803 Shim Stock

ASTM A240 GR S31803 Perforated Sheet

ASTM A240 GR S31803 Perforated Sheet

SA 240 GR S31803 Hairline Sheet

SA 240 GR S31803 Hairline Sheet

ASTM A240 GR S31803 Clad Plate

ASTM A240 GR S31803 Clad Plate

1.4462 Werkstoff S31803 Plate

1.4462 Werkstoff S31803 Plate

Duplex UNS S31803 Plate

Duplex UNS S31803 Plate


SA 240 GR S31803 Sheet Sizes And Schedules

Check sizes and dimensions of UNS S31803 DSS Cold Rolled Plate, ASME SA 240 S31803 Shim Sheet

Surface finish

Thickness (mm)

Width (mm)

ASTM A240 UNS S31803 1D – Hot rolled, heat treated, pickled Plate

2.4–12.7

max. 2032

2R – ASTM A240 UNS S31803 Cold-rolled, bright-annealed Plate

0.05–1.50

3–649

2H – ASTM A240 UNS S31803 Work hardened Plate

0.05–1.50

3–630

2B – ASTM A240 UNS S31803 Cold rolled, heat treated, pickled, skin passed Plate

0.25–8.0

max. 2032

2D – ASTM A240 UNS S31803 Cold rolled, heat treated, pickled Plate

0.4–6.35

max. 1524

2E – ASTM A240 UNS S31803 Cold rolled, heat treated, mechanically descaled Plate

0.4–8.0

max. 2032

2R – ASTM A240 UNS S31803 Cold rolled, bright annealed Plate

0.25–3.5

max. 1524

2H – ASTM A240 UNS S31803 Work hardened Plate

0.4–6.35

max. 1524

ASTM A240 UNS S31803 Polished, brushed Plate

0.5–4.0

max. 1524

Deco

0.3–3.5

max. 1524

ASTM A240 UNS S31803 Coil

0.30–3.5

max. 1,524


Surface finish

Thickness (in)

Width (in)

1 – ASTM A240 UNS S31803 Hot rolled, heat treated, pickled Plate

.1000 – .3750

max. 72

2R – ASTM A240 UNS S31803 Cold-rolled, bright-annealed Plate

 0.002–0.06

 0.118–25.551

2H – ASTM A240 UNS S31803 Work hardened Plate

 0.002–0.06

 0.118–24.803

2B – ASTM A240 UNS S31803 Cold rolled, heat treated, pickled, skin passed Plate

10–24

max. 72*

2D – ASTM A240 UNS S31803 Cold rolled, heat treated, pickled Plate

12–24

max. 60

1.4462 S31803 BA Mexinox only

18–28

max. 48

Deco Rolled-On Mexinox only

14–28

max. 48

ASTM A240 UNS S31803 Polished Plate (not brushed)

11–24

max. 60

1.4462 Werkstoff S31803 Temper rolled Mexinox only

13–29

max. 48


ASTM A240 GR S31803 Coils Chemical Properties

UNS S31803 F51 Plate Element Percent By Weight
Cr Chromium 22.0 - 23.0%
Ni Nickel 4.5 - 6.5%
Mn Manganese 2.0% max
Si Silicon 1.0% max
P Phosphorous 0.03% max
S Sulfur 0.02% max
C Carbon 0.03% max
N Nitrogen 0.1 - 0.2%
Mo Molybdenum 3.0 - 3.5%
Fe Iron Balance

UNS S31803 Plate Mechanical Strength

Wide selection of Cold Rolled SA 240 GR S31803 Sheet, Plate and Coils in Mumbai
Mechanical property Value

 

0.2% Yield Strength, ksi

 

65 min

 

SA-240 S31803 Sheet & Plate Tensile Strength, ksi

 

90 min

 

Elongation, %

 

25 min

22 Cr Duplex UNS S31803 Plate Hardness [HRC]

293 max


ASTM A240 UNS S31803 Duplex Plate Equivalent Material

Grade UNS
No
Old British Euronorm Swedish SS Japanese JIS
BS En No Name
2205 Plate S31803 / S32205 318S13 - 1.4462 X2CrNiMoN22-5-3 2377 SUS 329J3L

Physical Properties of UNS S31803 DSS Plate

Physical property Value
Density:  0.278 lb/in3   
Melting Range: 2525-2630°F

Specific Heat Capacity at 212°F

0.119 Btu/lb/°F

Thermal Conductivity at 212°F

8.4 Btu/hr-ft-°F

Poisson’s Ratio

0.3

Elastic Modulus at 72°F

29 x 10 psi


Duplex SA 240 S31803 Plate Tensile Strength

Ultimate Tensile Strength, ksi Minimum .2% Yield Strength, ksi Minimum Hardness Max.
95 65 31 Rockwell C

Huge Stock Of ASTM A240 UNS S31803 Plate

A240 S31803 Material S31803 Duplex Steel Plate
ASME SA 240 GR S31803 Foil ASME SA 240 GR S31803 2B Sheet
Duplex SA 240 S31803 Clad Plate Duplex SA 240 S31803 Flat Sheet
Polished ASME SA 240 GR S31803 Plate Sa 240 S31803 Checker Plate
Duplex SA 240 S31803 cold rolled sheet ASME SA 240 GR S31803 Hot Rolled Coil, Strip And Plate
ASTM A240 GR S31803 Sheet ASTM A240 GR S31803 Coil
ASTM A240 GR S31803 Checker Plate ASME SA 240 GR S31803 Quarto Plate
Sa 240 S31803 Plate Suppliers ASTM A240 UNS 31803 Coil
ASTM A240 GR S31803 Coils Sa 240 S31803 Coil
ASTM A240 GR S31803 Hot rolled plate Duplex Steel S31803 Rolling Sheet
Cold Rolled ASTM A240 UNS 31803 Sheet Suppliers ASTM A240 GR S31803 Checker Plate
ASTM A240 UNS 31803 Shim Sheet Duplex Steel S31803 Sheet
ASME SA 240 GR S31803 Corrugated Sheet Stainless Steel Grade S31803 Expanded Sheet
ASME SA 240 GR S31803 Rolls Sheet ASME SA 240 GR S31803 Foil Rolls
ASTM A240 UNS 31803 Chequered Plate Duplex SA 240 S31803 Clad Plate
Duplex SA 240 S31803 Chequer Plate ASTM A240 GR S31803 Plate
Sa 240 S31803 B. Q. Profile ASME SA 240 GR S31803 Coil
Sa 240 S31803 Sheet Stainless Steel Grade S31803 Rolling Sheet
ASME SA 240 GR S31803 Checker Plate ASME SA 240 GR S31803 Coil Slitting
ASTM A240 GR UNS S31803 Sheet ASME SA 240 GR S31803 Clad Plate
ASME SA 240 GR S31803 Plate ASTM A240 GR S31803 Rolling Sheet
ASME SA 240 GR S31803 Flat Strip Stainless Steel Grade S31803 Bbq Plate
UNS S31803 DSS Chequered Plate UNS S31803 DSS Strips
UNS S31803 DSS Coil Duplex UNS S31803 Coil
ASME SA 240 GR S31803 Coil ASTM A240 GR S31803 Strips
Decorative ASTM A240 GR UNS S31803 Sheet Mirror Finish ASME SA 240 GR S31803 Sheet
Duplex UNS S31803 Strips Duplex SA 240 S31803 Strips
ASME SA 240 GR S31803 Etching Sheet ASME SA 240 GR S31803 Floor Sheet
ASTM A240 GR S31803 Rolling Plate ASTM A240 GR S31803 Precision Strip
Duplex SA 240 S31803 Rolling Plate Duplex SA 240 S31803 Precision Strip
ASTM A240 UNS 31803 Strips UNS S31803 DSS Strips
SA 240 GR S31803 Sheet SA 240 GR S31803 Diamond Plate
ASTM A240 Duplex Stainless Steel S31803 Perforated Plate ASTM A240 GR S31803 Chequered Plate
Duplex UNS S31803 Strips ASME SA 240 GR S31803 Strips
ASTM A240 GR S31803 Rolling Sheet ASTM A240 GR S31803 Rolling Sheet
Duplex SA 240 S31803 Rolling Sheet ASTM A240 UNS 31803 SS Rolling Sheet
UNS S31803 DSS Rolling Sheet UNS S31803 Duplex Stainless Steel Rolling Sheet
ASME SA 240 GR S31803 Rolling Sheet ASTM A240 GR S31803 Chequered Plate
ASME SA 240 GR S31803 Mirror Sheet ASME SA 240 GR S31803 Patterned Sheet
ASTM A240 GR S31803 Sheet S31803 Sheet
Chequer Plate ASTM A240 GR UNS S31803 UNS S31803 DSS Sheet
Duplex UNS S31803 Sheet ASTM A240 GR UNS S31803 Sheet
ASTM A240 GR S31803 Hot rolled plate ASTM A240 GR S31803 Hot rolled plate
Duplex Steel 31803 Shim Stock ASME SA 240 GR S31803 Flat Shim
ASTM A240 Duplex Stainless Steel S31803 Hot rolled plate Hot rolled plate ASTM A240 UNS 31803
UNS S31803 DSS Hot rolled plate Duplex UNS S31803 Hot rolled plate
ASTM A240 GR UNS S31803 Hot rolled plate ASTM A240 GR S31803 Perforated Sheet
Embossed ASME SA 240 GR S31803 Sheet Thin ASME SA 240 GR S31803 Sheet
ASTM A240 GR S31803 Perforated Sheet ASTM A240 Duplex Stainless Steel S31803 Perforated Sheet
SA 240 GR S31803 Hairline Sheet No.4 ASME SA 240 GR S31803 Sheet
Perforated Sheet ASTM A240 UNS 31803 UNS S31803 DSS Perforated Sheet
Duplex UNS S31803 Perforated Sheet ASTM A240 GR UNS S31803 Perforated Sheet
ASTM A240 GR S31803 Clad Plate ASTM A240 GR S31803 Clad Plate
ASME SA 240 GR S31803 Checker Plate ASME SA 240 GR S31803 Shims
Clad Plates Duplex Stainless Steel UNS S31803 ASTM A240 Duplex Stainless Steel S31803 Clad Plate
UNS S31803 DSS Clad Plate Duplex UNS S31803 Clad Plate
ASTM A240 GR UNS S31803 Clad Plate 1.4462 Werkstoff S31803 Plate
ASME SA 240 GR S31803 Design Sheet ASTM A240 GR UNS S31803 Shim Stock
ASTM A240 GR S31803 Plate Duplex SA 240 S31803 Flat Sheet
Plate Duplex Stainless Steel UNS S31803 UNS S31803 DSS Plate
Duplex UNS S31803 Plate ASTM A240 GR UNS S31803 Plate

Locate our Stockist and Distributors in neighborhood countries

Indonesia, Philippines, Dammam -KSA, Belgium S31803 Stainless Steel Sheet
France, Europe, Qatar, Thailand Sa 240 Uns S31803 Plate
Germany, Thailand, Czechia, Malaysia Duplex Uns S31803 Cold Rolled Coil
USA, Bangladesh, Malaysia, Finland Astm A240 Uns S31803 Sheets
Saudi Arabia (KSA), Kuwait, South Africa, Brazil A240 S31803 Hr Plates
South Africa, Singapore, Bahrain, Singapore Sa240 S31803 Cold Rolled Polished Plate
Australia, UK, Philippines, Nigeria Uns S31803 Duplex Checker Plate
Malaysia, Hong Kong, Oman, UAE Astm A240 S31803 Rolling Sheet
Italy, Iran, Chile, Singapore S31803 Duplex Stainless Steel Shim Sheet
Turkey, Norway, United Arab Emirates (UAE), Malaysia A240 Uns S31803 Strips
Malaysia, Russia, Netherlands, Dubai Astm S31803 Perforated Plate
Spain, Mexico, Egypt, UK Uns S31803 Hot rolled plate
Europe, Malaysia, United Kingdom -UK, UAE F51 Duplex Sheet
Canada, Poland, UK, Ellington -United States Duplex S31803 Clad Plate
Malaysia, Canada, Philippines, Singapore Sa182 F51 Plate
Japan, Romania, Europe, Malaysia S31803 F51 cold rolled sheet
Colombia, Malaysia, Sweden, China Duplex Steel 1.4462
Taiwan, Los Alamos -Mexico, Malaysia, Philippines Uns S31803 F51 Flat Sheet
South Korea, NY 12203 (USA), Singapore, Malaysia Aisi S31803 2B Sheet

SA 240 GR S31803 Cold Rolled Sheet Usage

  • Storage Tanks: Palm oil, Wine, Marble slurry, Potable and Sewage water, Ethanol, Fruit juice, Biodiesel
  • Infrastructure: Bridges, Sluice gates
  • General-purpose applications and environments: Heat Exchangers, Water Heaters, Sea-water systems, Flue-gas cleaning.