We have Answers

  • +91 22 6636 3237
  • rahul@perfectimpex.net
Perfect Impex
Get a Quote

Stainless Steel 316 Round Bar

UNS S31600 Hex Bars And ASTM A276 Type 316 Rod Manufatcure in India


Grade 316 bars produced under specification ASTM A276, are either hot finished or the bars are cold finished. Depending on the finishing used on the UNS S31600 Black Round Bar, the furnishing conditions to be done will vary. For instance Conditions - H & T, are meant to be used for a 316 SS Square Bar, which is hot finished, whereas Condition S & B are for cold finished products.

Stainless Steel 316 Round Bar

Stainless Steel 316 Round Bar
ASTM A276 Type 316 Rod

ASTM A276 Type 316 Rod

Under condition A, the ASTM A276 Type 316 Rod or bar must be supplied in an annealed condition. For hot finished alloy 316 Stainless Steel Hex Bar to be delivered under Condition H the product is to be hardened as well as given a temper at a relative temperature. Similarly Condition T hot finished grade 316 Stainless Steel Flat Bar will first be hardened, after which the bar will undergo a tempering process at a relatively high temperature. The specification mentions that the AISI 316 Hex Bar produced under Condition S may be strain hardened or relatively light cold worked. Lastly, for cold finished Stainless Steel 316 Round Bar supplied under Condition B, the bars are almost cold worked under severe temperatures. Being marine steel, the 316 Stainless Steel Bar under specification  ASTM A276, must conform to mechanical tests for Brinell hardness, elongation, as well as tensile and yield strength.

Ready stock of 316 SS Hex Bar and UNS S31600 Rod in our Mumbai Warehouse


Table of Content


316 Stainless Steel Round Bar Specifications

ASME SA276 SS 316 Round bars size Diameter: 3-~800mm
SS 316 Grade Hex Bars size 2-100mm A/F
SS 316 Grade Flat bars size Thickness: 2 -100mm
Width: 10 to 500mm
AISI 316 SS Square bars size 4 to 100mm
SS UNS S31600 Angle bars size (in mm) 3*20*20~12*100*100
SS UNS S31600 Section 3.0 to 12.0mm thickness
ASTM A276 F316 SS Channel Bars (in mm) 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness
SUS 316 SS Hollow Bars (in mm) 32 OD x 16 ID to 250 OD x 200 ID)
316 SS Billet Size 1/2″ to 495mm Diameter
316 SS Rectangles Size 33 x 30mm to 295 x 1066mm
SS 316 Grade Round Bars Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
1.4401 / 1.4436 AISI 316 SS Round Bars Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
316 SS Round Bars Condition Hardened & tempered, annealed
Stainless Steel 316 Bars Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
SAE 316 SS Round Bars Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
SS 316 Bars Processing Bar cutting to 650mm

Different AISI 316L Hex Bar Types

Buy directly from AISI 316 Flat Bar and 316 SS Hex Bar Manufacturer for a low cost in Mumbai

316 Stainless Steel Threaded Bars

316 Stainless Steel Threaded Bars

316 Stainless Steel Hex Bars

316 Stainless Steel Hex Bars

Stainless Steel 316 Hollow Bar

Stainless Steel 316 Hollow Bar

ASTM A276 type 316 rod

ASTM A276 type 316 rod

316 Stainless Steel Flat Bars

316 Stainless Steel Flat Bars

SS 316 Rectangular Bar

SS 316 Rectangular Bar

316 Stainless Steel Square Bars

316 Stainless Steel Square Bars

316 Stainless Steel Rod

316 Stainless Steel Rod

Stainless Steel 316 Rounds

Stainless Steel 316 Rounds

ASTM A276 AISI 316 T-Bars

ASTM A276 AISI 316 T-Bars

ASTM A276 AISI 316 Half-Round Bar

ASTM A276 AISI 316 Half-Round Bar

316 Stainless Steel Round Bars

316 Stainless Steel Round Basr


Size Chart Of Stainless Steel 316 Hex Bar

Size (mm)
Weight (kg/m)
Size (mm)
Weight (kg/m)
Size (mm)
Weight (kg/m)
7 x 7
0.337
19 x 19
2.479
38 x 38
9.916
8 x 8
0.44
20 x 20
2.747
40 x 40
10.988
9 x 9
0.556
21 x 21
3.029
42 x 42
12.114
10 x 10
0.687
22 x 22
3.324
45 x 45
13.906
11 x 11
0.831
24 x 24
3.956
48 x 48
15.822
12 x 12
0.989
25 x 25
4.292
50 x 50
17.168
13 x 13
1.161
26 x 26
4.642
53 x 53
19.29
14 x 14
1.346
28 x 28
5.384
55 x 55
20.774
15 x 15
1.545
30 x 30
6.181
60 x 60
24.723
16 x 16
1.758
32 x 32
7.032
65 x 65
29.015
17 x 17
1.985
34 x 34
7.939
70 x 70
33.65
18 x 18
2.225
36 x 36
8.9
75 x 75
38.629

SS 316 Hollow Bar Sizes

sizes in mm
Size (inch)
Thickness (mm)
Thickness (in Inches)
22
7/8
17 & 18
2/3 - 5/7
25
1
5 to 20
3/16 - 4/5
30
1-3/16
5 to 20
3/16 - 4/5
32
1-1/4
6 to 20
1/4 - 4/5
35
1-3/8
5 to 20
3/16 - 3/16
40
1-4/7
5 to 25
3/16 - 1
45
1-7/9
5 to 25
3/16 - 1
47
1-6/7
17,25 & 32
2/3, 1 & 1-1/4
50
2
5 to 32
3/16 - 1-1/4
55
2-1/16
5 to 25
3/16 - 1
57
2-1/4
32
1-1/4
60
2-3/8
5 to 35
3/16 - 1-3/8
63
2-1/2
10 to 30
3/8 - 1-3/16
65
2-5/9
10 to 30 & 35
3/8 - 1-3/16, & 1-3/8
70
2-3/4
6 to 25 & 40
1/4 - 1, & 1-4/7
75
3
8 to 25
5/16 - 1
80
3-1/8
8 to 20
5/16 - 4/5
90
3-1/2
8 to 20
5/16- 4/5
100
4
8, 10, 12
5/16, 3/8, 1/2

Stainless Steel 316 Round Bar Size Chart

A wide selection of DIN 1.4436 Round Bar, UNS S31600 Bright Bar, ISO Certifed 316 Stainless Steel Round Bar Suppliers
Size Chucked true to OD Chucked true to ID
OD,
mm		 ID,
mm		 Max. OD,
mm		 Min. ID,
mm		 Max. OD,
in.		 Min. ID,
in.		 Max. OD,
mm		 Min. ID,
mm		 Max. OD,
in.		 Min. ID,
in.
32 20 31 21.9 1.220 0.862 30 21 1.185 0.827
32 16 31 18 1.220 0.709 30 17 1.181 0.669
36 25 35 26.9 1.378 1.059 34.1 26 1.343 1.024
36 20 35 22 1.378 0.866 34 21 1.339 0.827
36 16 35 18.1 1.378 0.713 33.9 17 1.335 0.669
40 28 39 29.9 1.535 1.177 38.1 29 1.500 1.142
40 25 39 27 1.535 1.063 38 26 1.496 1.024
40 20 39 22.1 1.535 0.870 37.9 21 1.492 0.827
45 32 44 33.9 1.732 1.335 43.1 33 1.697 1.299
45 28 44 30 1.732 1.181 43 29 1.693 1.142
45 20 44 22.2 1.732 0.874 42.8 21 1.685 0.827
50 36 49 38 1.929 1.496 48 37 1.890 1.457
50 32 49 34.1 1.929 1.343 47.9 33 1.886 1.299
50 25 49 27.2 1.929 1.071 47.8 26 1.882 1.024
56 40 55 42 2.165 1.654 54 41 2.126 1.614
56 36 55 38.1 2.165 1.500 53.9 37 2.122 1.457
56 28 55 30.3 2.165 1.193 53.7 29 2.114 1.142
63 50 62 51.9 2.441 2.043 61.1 51 2.406 2.008
63 45 62 47 2.441 1.850 61 46 2.402 1.811
63 40 62 42.2 2.441 1.661 60.8 41 2.394 1.614
63 36 62 38.3 2.441 1.508 60.7 37 2.390 1.457
63 32 62 34.4 2.441 1.354 60.6 33 2.386 1.299
71 56 69.9 58 2.752 2.283 68.9 57 2.713 2.244
71 45 69.9 47.3 2.752 1.862 68.6 46 2.701 1.811
71 40 69.9 42.4 2.752 1.669 68.5 41 2.697 1.614
71 36 69.9 38.5 2.752 1.516 68.4 37 2.693 1.457
75 60 73.8 62 2.906 2.441 72.8 61 2.866 2.402
75 50 73.8 52.2 2.906 2.055 72.6 51 2.858 2.008
75 40 73.8 42.5 2.906 1.673 72.3 41 2.846 1.614
80 63 78.8 65 3.102 2.559 77.8 64 3.063 2.520
80 50 78.8 52.4 3.102 2.053 77.4 51 3.047 2.008
80 45 78.8 47.5 3.102 1.870 77.3 46 3.043 1.811
80 40 78.8 42.6 3.102 1.677 77.2 41 3.039 1.614
85 67 83.7 69.1 3.295 2.720 82.6 68 3.252 2.677
85 55 83.7 57.4 3.295 2.260 82.3 56.0 3.240 2.205
85 45 83.7 47.6 3.295 1.874 82.1 46.0 3.232 1.811
90 71 88.6 73.1 3.488 2.878 87.6 72.1 3.449 2.839
90 63 88.6 65.3 3.488 2.571 87.3 64.0 3.437 2.520
90 56 88.6 58.5 3.488 2.303 87.1 57.0 3.429 2.244
90 50 88.6 52.6 3.488 2.071 87.0 51.0 3.425 2.008
95 75 93.5 77.3 3.681 3.041 92.4 76.2 3.641 2.997
95 67 93.5 69.3 3.681 2.728 92.2 68.0 3.630 2.677
95 50 93.5 52.7 3.681 2.075 91.8 51.0 3.614 2.008
100 80 98.5 82.3 3.878 3.240 97.4 81.2 3.835 3.197
100 71 98.5 73.4 3.878 2.890 97.2 72.1 3.827 2.839
100 63 98.5 65.5 3.878 2.579 97.0 64.0 3.819 2.520
100 56 98.5 58.7 3.878 2.311 96.8 57.0 3.811 2.244
106 80 104.4 82.5 4.110 3.248 103.1 81.2 4.059 3.197
106 71 104.4 73.5 4.110 2.894 103.0 72.1 4.055 2.839
106 63 104.4 65.7 4.110 2.587 102.7 64.0 4.043 2.520
106 56 104.4 58.9 4.110 2.319 102.5 57.0 4.035 2.244
112 90 110.3 92.5 4.343 3.642 109.2 91.4 4.299 3.598
112 80 110.3 82.6 4.343 3.252 108.9 81.2 4.287 3.197
112 71 110.3 73.7 4.343 2.902 108.7 72.1 4.280 2.839
112 63 110.3 65.8 4.343 2.591 108.5 64.0 4.272 2.520
118 90 116.2 92.7 4.575 3.650 114.9 91.4 4.524 3.598
118 80 116.2 82.8 4.575 3.260 114.6 81.2 4.512 3.197
118 71 116.2 73.8 4.575 2.906 114.5 72.1 4.508 2.839
118 63 116.2 66.0 4.575 2.598 114.2 64.0 4.496 2.520
125 100 123.1 102.7 4.846 4.043 121.9 101.5 4.799 3.996
125 90 123.1 92.8 4.846 3.654 121.7 91.4 4.791 3.598
125 80 123.1 82.9 4.846 3.264 121.4 81.2 4.780 3.197
125 71 123.1 74.0 4.846 2.913 121.3 72.1 4.772 2.839
132 106 130.0 108.8 5.118 4.283 128.8 107.6 5.071 4.236
132 90 130.0 93.0 5.118 3.661 128.4 91.4 5.055 3.598
132 80 130.0 83.1 5.118 3.272 128.1 81.2 5.043 3.197
132 71 130.0 74.2 5.118 2.921 121.2 72.1 5.035 2.839
140 112 137.9 115 5.429 4.528 136.6 113.7 5.378 4.476
140 100 137.9 103.1 5.429 4.059 136.3 101.5 5.366 3.996
140 90 137.9 93.2 5.429 3.669 136.1 91.4 5.358 3.598
140 80 137.9 83.3 5.429 3.280 135.8 81.2 5.346 3.197
150 125 147.7 128.1 5.815 5.043 146.5 126.9 5.768 4.996
150 106 147.7 109.3 5.815 4.303 146 107.6 5.748 4.236
150 95 147.7 98.4 5.815 3.874 145.7 96.4 5.736 3.795
150 80 147.7 83.6 5.815 3.291 145.3 81.2 5.720 3.197
160 132 157.6 135.3 6.205 5.327 156.3 134 6.154 5.276
160 122 157.6 125.4 6.205 4.937 156 123.8 6.142 4.874
160 112 157.6 115.5 6.205 4.547 155.8 113.7 6.134 4.476
160 90 157.6 94.0 6.205 3.701 155.2 91.4 6.110 3.598
170 140 167.4 143.5 6.591 5.650 166 142.1 6.535 5.594
170 130 167.4 133.6 6.591 5.260 165.8 132 6.528 5.197
170 128 167.4 131.6 6.591 5.181 165.7 130 6.524 5.118
170 118 167.4 121.7 6.591 4.791 165.5 119.8 6.516 4.717
170 106 167.4 109.8 6.591 4.323 165.2 107.6 6.504 4.236
170 100 167.4 103.9 6.591 4.091 165 101.5 6.496 3.996
180 150 177.3 153.6 6.980 6.047 176 152.3 6.929 5.996
180 140 177.3 143.7 6.980 5.657 175.7 142.1 6.917 5.594
180 125 177.3 128.9 6.980 5.075 175.3 126.9 6.902 4.996
180 100 177.3 104.1 6.980 4.098 174.7 101.5 6.878 3.996
190 160 187.1 163.8 7.366 6.449 185.7 162.4 7.311 6.394
190 150 187.1 153.9 7.366 6.059 185.5 152.3 7.303 5.996
190 132 187.1 136 7.366 5.354 185.1 134 7.287 5.276
200 170 197.0 173.9 7.756 6.846 195.6 172.6 7.701 6.795
200 160 197.0 164 7.756 6.457 195.4 162.4 7.693 6.394
200 150 197.0 154.1 7.756 6.067 195.2 152.3 7.685 5.996
200 140 197.0 144.2 7.756 5.677 194.9 142.1 7.673 5.594
212 170 208.8 174.2 8.220 6.858 207.2 172.6 8.157 6.795
212 150 208.8 154.4 8.220 6.079 206.6 152.3 8.133 5.997
212 130 208.8 134.6 8.220 5.299 206.2 132 8.118 5.197
224 180 220.6 184.4 8.685 7.260 218.9 182.7 8.618 7.193
224 140 220.6 144.8 8.685 5.701 217.9 142.1 8.579 5.594
236 190 232.4 194.6 9.150 7.661 230.7 192.9 9.083 7.594
236 150 232.4 155.0 9.150 6.102 229.7 152.3 9.043 5.996
250 200 246.2 204.9 9.693 8.067 244.3 203.0 9.618 7.992
275 200 268.9 205.4 10.587 8.087 266.5 203.0 10.492 7.992

Best Material 316 Stainless Steel Round Bar Suppliers in following projects

Dammam -KSA, Philippines, Indonesia, Belgium 316 stainless steel round bar
Qatar, Europe, France, Thailand ss 316 round bar
Czechia, Thailand, Germany, Malaysia 316 round bar
Malaysia, Bangladesh, USA, Finland A479 Gr 316 Flat Bar
South Africa, Kuwait, Saudi Arabia (KSA), Brazil SS 316 Hex Bar
Bahrain, Singapore, South Africa, Singapore UNS S31600 Black Round Bar
Philippines, UK, Australia, Nigeria 316 stainless bar
Oman, Hong Kong, Malaysia, UAE 316h round bar
Chile, Iran, Italy, Singapore 316 stainless round bar
United Arab Emirates (UAE), Norway, Turkey, Malaysia ASTM A276 Type 316 Rod
Netherlands, Russia, Malaysia, Dubai Stainless Steel 316 Square Bar
Egypt, Mexico, Spain, UK stainless 316 25mm steel round bar
United Kingdom -UK, Malaysia, Europe, UAE steel round bar rod 10mm 12mm
UK, Poland, Canada, Ellington -United States 50mm cold drawn 316 polished ss round bar
Philippines, Canada, Malaysia, Singapore Hot Rolled 316 Stainless Steel Bars
Europe, Romania, Japan, Malaysia Stainless Steel Werkstoff Nr. 1.4435 Threaded Bar
Sweden, Malaysia, Colombia, China ASTM A479 Gr316 Rods
Malaysia, Los Alamos -Mexico, Taiwan, Philippines 316 Stainless Steel Flat Bar
Singapore, NY 12203 (USA), South Korea, Malaysia SS 316 Welding Rod

ASTM A276 Type 316 Rod Chemical Properties

Grade C Mn Si P S Cr Mo Ni N
SS 316 0.08 max 2 max 0.75 max 0.045 max 0.030 max 16 – 18 2 – 3 10 – 14 0.1 max

UNS S31600 Square Bar Mechanical Strength

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

AISI 316 Flat Bar Equivalent Material

Find exact sizes of ASTM A276 Type 316 Round Bar, AISI 316 Hex Bar in Mumbai
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 – Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3

ASME SA276 316 Rod Tolerance

Tolerances for Cold Drawn SS UNS S31600 Round Bars
Shape / Section Size, diameter or width across flats Permitted variation
mm mm
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100		 + 0 to – 0.070
+ 0 to – 0.085
+ 0 to – 0.100
+ 0 to – 0.120
+ 0 to – 0.140
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80		 + 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.250
+ 0 to – 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320		 + 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.160
+ 0 to – 0.190
+ 0 to – 0.220
+ 0 to – 0.350
+ 0 to – 1.00
+ 1.00 to – 1.00
Square and
hexagon		 ≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105		 + 0 to – 0.090
+ 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.160
+ 0 to – 0.250

Products


Have Any Questions?

+91 22 6636 3237

rahul@perfectimpex.net
Get A Quote

© 2020 All Rights Reserved by Perfect Impex. Designed By Mesotek.

We are On: